Land & Investing

How Do I Find Out What Land Is Zoned For in Texas?

Before you buy land in Texas, find out whose rules apply: city zoning, ETJ platting or county rules. Here's how to check zoning and what it won't tell you.

KB
Katie Bankston· Principal, The Bankston Group at The Agency Dallas
·November 15, 2026·Land Guide

The short answer

Start by finding out whose rules apply. Inside city limits, check whether the city has adopted zoning; if it has, look the property up on the city's official zoning map and confirm the district with the city's zoning staff, in writing if your decision depends on it. Just outside a city, in its extraterritorial jurisdiction (ETJ), Texas law generally doesn't let the city zone the land, though its platting rules can still apply. In unincorporated areas, there's usually no zoning at all, but county rules, permits and private deed restrictions still shape what you can build.

Zoning tells you what the city allows. It doesn't tell you everything the land allows.

Step 1: Figure out whose rules apply

Every piece of land in Texas falls into one of three situations, and each one changes the question you're asking.

  • Inside city limits. City zoning applies where the city has adopted it. Chapter 211 of the Texas Local Government Code lets a city regulate the height and size of buildings, how much of a lot can be covered, the size of yards, density, and the location and use of buildings and land.
  • In a city's ETJ. Under Section 212.003 of the Local Government Code, unless another state law says otherwise, a city can't regulate the use of buildings or property in its ETJ, the bulk, height or number of buildings on a tract, or the number of units per acre. It can extend its subdivision and platting rules there. Fort Worth's zoning page puts it simply: before land is developed in the city, it must be zoned and platted, while property in the ETJ is subject only to platting.
  • Unincorporated, outside any ETJ. County rules apply. Tarrant County's own development guideline says the county does not have authority under state law to implement or enforce zoning, and that it doesn't issue building permits or certificates of occupancy for residential homes. That doesn't mean anything goes. The same guideline requires a floodplain permit for development in a FEMA floodplain, permits or registration for water wells and septic systems, and approval for driveway access.

One thing I want buyers to understand: a mailing address doesn't settle this. The city name on an address and the actual city limits don't always line up, especially on the edges of the west side of the metro. Check the parcel itself on the city's or county's map.

Step 2: Look up the zoning district, then read what it allows

Inside a city, the zoning map gives you a district, usually a short code. In Fort Worth, the city's Development Services zoning page links to the official zoning map, a Permit Assist zoning tool and the application for a zoning verification letter.

The district name alone doesn't tell you much. Fort Worth's own zoning overview explains that zoning regulates lot size, setbacks, height, parking, landscaping and signage, that each district has its own standards, and that allowed uses are listed in use charts. Two things to look for:

  • Overlays. An overlay district adds rules on top of the base district.
  • Planned Developments (PD). A PD is site-specific and can carry additional restrictions tied to its own site plan. If the land is zoned PD, get the ordinance for that PD and read it.

When a purchase depends on a specific use, I'd rather have the city's answer in writing than rely on a map screenshot.

Step 3: Check the private rules zoning doesn't cover

Zoning is public law. Deed restrictions and HOA covenants are private rules recorded against the land, and they can be stricter than zoning. A lot zoned for a use may still be restricted from it by a recorded covenant.

The Texas Real Estate Commission's Unimproved Property Contract (TREC No. 9-18) builds this review into the deal:

  • The seller furnishes a title commitment, and the buyer receives legible copies of restrictive covenants and the documents behind the commitment's exceptions.
  • The buyer may object in writing to exceptions that prohibit a use or activity the buyer writes into the contract.
  • The buyer has to object by the earlier of closing or the negotiated number of days after receiving the title commitment, exception documents and survey; missing that deadline waives objections, except Schedule C requirements.

The same form notes that the title policy is subject to the promulgated exclusions, including existing building and zoning ordinances. In plain language, title insurance won't cover you if the zoning doesn't fit your plans. The zoning check is yours to do.

Step 4: If the zoning doesn't fit, understand what a change involves

Sometimes the land is right and the zoning isn't. Rezoning is possible, but it's a public process with no promised outcome. Texas law requires a public hearing before a zoning regulation or boundary takes effect, with published notice before the 15th day before the hearing. In Fort Worth, the city describes the steps this way:

  • An application, with legal notices to landowners within 300 feet and courtesy notices to registered neighborhood organizations within half a mile.
  • A Zoning Commission public hearing and recommendation.
  • A City Council public hearing the following month for approval or denial.
  • If the request is denied or withdrawn, ask zoning staff when a similar application can be accepted or scheduled; a 12-month waiting period may apply.

If a rezoning is the plan, the timeline and the risk belong in your offer strategy, not in your hopes.

What I tell clients before they buy land

When a client sends me a lot, my first question is: what do you want to put here? Then we make the land prove it can hold that.

From a design perspective, zoning and deed restrictions draw the real outline of your future home. Setbacks, height limits and lot coverage decide the buildable area, and that's often a smaller footprint than the acreage suggests. Add a floodplain line, an easement or a septic field, and the house, the pool and the guest quarters you pictured may need a different arrangement, or a different lot.

So on every land contract, I want three things done before the option period ends: the zoning confirmed with the city (or confirmed that there isn't any), the restrictive covenants read line by line, and the buyer's intended use written into the objection blank in Paragraph 6D, so the contract knows what we're protecting. It's a small step that does a lot of work.

Paragraph 6D's objection deadline is separate and may arrive before the option period ends.

Zoning is one of three questions I ask on every lot. The other two are covered in how to check if land is in a flood zone and how to find out if land has water and sewer, and my build-on-your-lot roadmap walks through the rest. If you're looking at land in or around Fort Worth, our Fort Worth page is a good place to start, and you'll find more for land and income property buyers on our Investors page.

If you've found a lot you love, let's investigate what you can actually do with it before you make the decision. Send me the address and what you want to build, and I'll help you figure out whether the land supports the vision.

— Katie Bankston, Principal, The Bankston Group at The Agency Dallas

FAQ

How do I find the zoning for a property in Fort Worth?

The City of Fort Worth's Development Services zoning page links to the official zoning map and a Permit Assist zoning tool, and offers an application for a zoning verification letter. Read the district's standards and use charts in the zoning ordinance, and check for overlays or a Planned Development ordinance.

Is there zoning outside city limits in Texas?

Generally not at the county level. Tarrant County says it does not have authority under state law to implement or enforce zoning in unincorporated areas. County rules still apply, including floodplain, well, septic and driveway permits.

Can a city zone land in its extraterritorial jurisdiction (ETJ)?

Generally no. Texas Local Government Code Section 212.003 says that, unless another state law authorizes it, a city can't regulate the use of buildings or property, building bulk or height, or units per acre in its ETJ. The city's subdivision and platting rules can still apply there.

Do deed restrictions override zoning?

They're separate. Zoning is a public rule, and deed restrictions are private recorded rules. A property has to work under both, so a use zoning allows can still be restricted by a covenant. Review the restrictive covenants that come with the title commitment.

Does title insurance protect me if the zoning doesn't allow my plans?

Not in that way. The TREC Unimproved Property Contract notes that the title policy is subject to its exclusions, including existing building and zoning ordinances. Confirm zoning yourself before your option period ends.

Sources

This article is general information, not financial or legal advice. Zoning, platting, permitting rules and deed restrictions vary by property and change over time; confirm current requirements with the city or county, review the title commitment and restrictive covenants, and consult a real estate attorney before relying on a specific use. The Bankston Group is a team at The Agency Dallas.

Katie Bankston
Katie Bankston

Principal, The Bankston Group at The Agency Dallas

Katie helps buyers, sellers, builders and developers across Dallas–Fort Worth, with a focus on new construction, custom homes and land.